Parameters of INTEL SSDSC2BF180A4L with Firmware LSTi
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDSC2BF180A4L |
| Capacity | 180 GB (167.6 GiB) |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.0 |
| Controller | SandForce |
| Firmware | LSTi |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| ATA version | ACS-2 |
| Advanced Format | supported |
| Units tested | 4 |
| Times tested | 18 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 466 MiB/s |
| Maximum read speed | 393 MiB/s |
| Minimum average access time | 0.17 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Device sleep (DevSleep) | supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 22 |
| SMART command transport (SCT) | supported |
| Full self-test time | 58 minutes |
| Critical maximum temperature | 75°C (167°F) |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 65°C (149°F) |
| Average maximum temperature | 63°C (145°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 4 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | supported |