Parameters of INTEL SSDSC2BW180A3H with Firmware LCSi
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDSC2BW180A3H |
| Capacity | 167.6 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | LCSi |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 7 |
| Times tested | 9 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 451 MB/s |
| Maximum read speed | 410 MB/s |
| Minimum average access time | 0.13 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 21 |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 48 minutes |
| Temperature sensor | not supported |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 4 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |