General information |
Trademark | Intel |
Model | INTEL SSDSC2BW480A4 |
Capacity | 447.1 GB |
Interface | SATA |
SATA version | 3.0 |
Firmware | DC32 |
Firmware upgrade | supported |
SSD controller | SandForce |
ATA version | ACS-2 |
Advanced Format | not supported |
Units tested | 4 |
Times tested | 4 |
Performance |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 383 MB/s |
Maximum read speed | 344 MB/s |
Minimum average access time | 0.11 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Native command queuing (NCQ) | supported |
Advanced power management (APM) | supported |
Device sleep (DevSleep) | supported |
Clearing unused data (TRIM) | supported |
Reliability |
Count of sensors | 22 |
SMART command transport (SCT) | supported |
Full self-test time | 48 minutes |
Critical maximum temperature | 75°C (167°F) |
Recommended maximum temperature | 70°C (158°F) |
Maximum temperature | 69°C (156°F) |
Average maximum temperature | 65°C (149°F) |
Security |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 4 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | not supported |
Trusted computing | not supported |