Parameters of INTEL SSDSC2KW240H6 with Firmware LSF031C
| General information | |
|---|---|
| Trademark | Intel |
| Model | INTEL SSDSC2KW240H6 |
| Capacity | 240 GB (223.5 GiB) |
| Form-factor | 2.5" |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.2 |
| Controller | Silicon Motion |
| Firmware | LSF031C |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| ATA version | ACS-3 |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 3 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 128 MiB/s |
| Maximum read speed | 43 MiB/s |
| Minimum average access time | 2.12 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Device sleep (DevSleep) | not supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 23 |
| SMART command transport (SCT) | supported |
| Full self-test time | 15 minutes |
| Recommended maximum temperature | 100°C (212°F) |
| Maximum temperature | 71°C (159°F) |
| Average maximum temperature | 67°C (152°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 4 minutes |
| Instant data destruction | supported |
| Host protected area (HPA) | supported |
| Host protected area password | not supported |
| Trusted computing | not supported |