Parameters of INTEL SSDSCKGF256A5 SATA 256GB with Firmware LB1i
General information | |
---|---|
Trademark | Intel |
Model | INTEL SSDSCKGF256A5 SATA 256GB |
Capacity | 238.4 GB |
Interface | SATA |
SATA version | 3.2 |
Form-factor | M.2 |
Firmware | LB1i |
Firmware upgrade | supported |
SSD controller | SandForce |
ATA version | ACS-3 |
Advanced Format | not supported |
Units tested | 4 |
Times tested | 23 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 426 MB/s |
Maximum read speed | 398 MB/s |
Minimum average access time | 0.13 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 29 |
SMART Command Transport (SCT) | supported |
Duration of full self test | 58 minutes |
Critical maximum temperature | 75°C (167°F) |
Recommended maximum temperature | 70°C (158°F) |
Maximum temperature | 79°C (174°F) |
Average maximum temperature | 75°C (167°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 4 minutes |
Instant data destruction | supported |
Host protected area (HPA) | supported |
Host protected area password | not supported |
Trusted computing | not supported |