Parameters of INTEL SSDSCKKW256H6 with Firmware LBF010C
General information | |
---|---|
Trademark | Intel |
Model | INTEL SSDSCKKW256H6 |
Capacity | 238.4 GB |
Interface | SATA |
SATA version | 3.2 |
Form-factor | M.2 |
Firmware | LBF010C |
Firmware upgrade | supported |
SSD controller | Silicon Motion |
ATA version | ACS-3 |
Advanced Format | not supported |
Units tested | 2 |
Times tested | 3 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum read speed | 414 MB/s |
Minimum average access time | 0.11 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 23 |
SCT Transport | supported |
Duration of full self test | 15 minutes |
Recommended maximum temperature | 100°C (212°F) |
Maximum temperature | 74°C (165°F) |
Average maximum temperature | 72°C (161°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 4 minutes |
Instant data destruction | supported |
Host protected area (HPA) | supported |
Host protected area password | not supported |
Trusted computing | not supported |