Parameters of KINGMAX SSD 120GB with Firmware M1003B
| General information | |
|---|---|
| Trademark | Kingmax |
| Model | KINGMAX SSD 120GB |
| Capacity | 111.7 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Firmware | M1003B |
| Alternative firmwares | 13 |
| Firmware upgrade | not supported |
| SSD controller | Silicon Motion |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 128 MB/s |
| Maximum read speed | 50 MB/s |
| Minimum average access time | 0.34 msec |
| Cache buffer | 31.9 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 20 |
| SCT Transport | not supported |
| Duration of full self test | 40 minutes |
| Maximum temperature | 52°C (125°F) |
| Average maximum temperature | 52°C (125°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 6 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |