Parameters of KINGSTON SA400S37240G with Firmware 03070009
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SA400S37240G |
| Capacity | 223.5 GB |
| Interface | SATA |
| SATA version | 3.2 |
| Firmware | 03070009 |
| Alternative firmwares | 62 |
| Firmware upgrade | supported |
| SSD controller | Phison |
| ATA version | ACS-3 |
| Advanced Format | not supported |
| Units tested | 4 |
| Times tested | 24 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum read speed | 300 MB/s |
| Minimum average access time | 0.21 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 26 |
| SCT Transport | not supported |
| Duration of full self test | 1 minutes |
| Maximum temperature | 34°C (93°F) |
| Average maximum temperature | 28°C (82°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 6 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | not supported |
| Trusted Computing | not supported |