Parameters of KINGSTON SA400S37480G with Firmware S1Z40102
General information | |
---|---|
Trademark | Kingston |
Model | KINGSTON SA400S37480G |
Capacity | 447.1 GB |
Interface | SATA |
SATA version | 3.2 |
Firmware | S1Z40102 |
Alternative firmwares | 49 |
Firmware upgrade | supported |
SSD controller | Silicon Motion |
ATA version | ACS-3 |
Advanced Format | not supported |
Units tested | 9 |
Times tested | 31 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 490 MB/s |
Maximum read speed | 481 MB/s |
Minimum average access time | 0.4 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | not supported |
TRIM | supported |
Reliability | |
Count of sensors | 26 |
SMART Command Transport (SCT) | not supported |
Duration of full self test | 10 minutes |
Maximum temperature | 62°C (143°F) |
Average maximum temperature | 48°C (118°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 6 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | not supported |
Trusted computing | not supported |