General information |
Trademark | Kingston |
Model | KINGSTON SEDC450R960G |
Capacity | 894.2 GB |
Interface | SATA |
SATA version | 3.1 |
Form-factor | 2.5" |
Firmware | SCEKH3.7 |
Firmware upgrade | supported |
SSD controller | Phison |
ATA version | ACS-3 |
Advanced Format | not supported |
Units tested | 1 |
Times tested | 1 |
Performance |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 127 MB/s |
Maximum read speed | 117 MB/s |
Minimum average access time | 0.14 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Native command queuing (NCQ) | supported |
Advanced power management (APM) | supported |
Device sleep (DevSleep) | not supported |
Clearing unused data (TRIM) | supported |
Reliability |
Count of sensors | 28 |
SMART command transport (SCT) | not supported |
Full self-test time | 2 minutes |
Maximum temperature | 57°C (134°F) |
Average maximum temperature | 57°C (134°F) |
Security |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 4 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |