Parameters of KINGSTON SUV400S37120G with Firmware 0C3J96R9
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SUV400S37120G |
| Capacity | 111.7 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Form-factor | M.2 |
| Firmware | 0C3J96R9 |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-4 |
| Advanced Format | supported |
| Units tested | 78 |
| Times tested | 160 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 475 MB/s |
| Maximum read speed | 464 MB/s |
| Minimum average access time | 0.3 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 30 |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 5 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 71°C (159°F) |
| Average maximum temperature | 44°C (111°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 4 minutes |
| Instant data destruction | supported |
| Host protected area (HPA) | supported |
| Host protected area password | not supported |
| Trusted computing | not supported |