Parameters of KINGSTON SUV400S37240G with 0C3FD6SD Firmware
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SUV400S37240G |
| Capacity | 223.5 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Form-factor | M.2 |
| Firmware | 0C3FD6SD |
| Alternative firmwares | 4 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-4 |
| Advanced Format | supported |
| Units tested | 15 |
| Times tested | 24 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 461 MB/s |
| Maximum read speed | 449 MB/s |
| Minimum average access time | 0.3 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 30 |
| SCT Transport | supported |
| Duration of full self test | 5 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 70°C (158°F) |
| Temperature sensor | not supported |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Complete destruction of information | 4 minutes |
| Instant information destruction | supported |
| Hidden partition | supported |
| Partition access restriction | not supported |
| Trusted Computing | not supported |