Parameters of KINGSTON SUV500M8240G with Firmware 003056RI
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SUV500M8240G |
| Capacity | 223.5 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Form-factor | M.2 |
| Firmware | 003056RI |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-4 |
| Advanced Format | supported |
| Units tested | 3 |
| Times tested | 6 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 451 MB/s |
| Maximum read speed | 424 MB/s |
| Minimum average access time | 0.9 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 30 |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 5 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 63°C (145°F) |
| Average maximum temperature | 52°C (125°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 4 minutes |
| Instant data destruction | supported |
| Host protected area (HPA) | supported |
| Host protected area password | not supported |
| Trusted computing | supported |