Parameters of KINGSTON SV100S2128G with Firmware 120504
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SV100S2128G |
| Capacity | 119.2 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Form-factor | 2.5" |
| Firmware | 120504 |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| SSD controller | JMicron61x |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 3 |
| Times tested | 7 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum read speed | 231 MB/s |
| Minimum average access time | 0.26 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 17 |
| SCT Transport | not supported |
| Duration of full self test | 1 minutes |
| Maximum temperature | 43°C (109°F) |
| Average maximum temperature | 41°C (105°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 12 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |