Parameters of KINGSTON SVP100S296G with Firmware CJR10202
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SVP100S296G |
| Capacity | 89.4 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Form-factor | 2.5" |
| Firmware | CJR10202 |
| Firmware upgrade | supported |
| SSD controller | JMicron61x |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 9 |
| Times tested | 26 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 237 MB/s |
| Maximum read speed | 220 MB/s |
| Minimum average access time | 0.9 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | not supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 18 |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 9 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 40°C (104°F) |
| Maximum temperature | 60°C (140°F) |
| Average maximum temperature | 36°C (96°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |