Parameters of KINGSTON SVP200S3120G with 503ABBF0 Firmware
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SVP200S3120G |
| Capacity | 111.7 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | 503ABBF0 |
| Alternative firmwares | 4 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 5 |
| Times tested | 5 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 466 MB/s |
| Maximum read speed | 399 MB/s |
| Minimum average access time | 0.20 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 22 |
| SCT Transport | supported |
| Duration of full self test | 48 minutes |
| Critical maximum temperature | 198°C (132°F) |
| Recommended maximum temperature | 105°C (221°F) |
| Maximum temperature | 84°C (183°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Complete destruction of information | 2 minutes |
| Instant information destruction | not supported |
| Hidden partition | supported |
| Partition access restriction | not supported |
| Trusted Computing | not supported |