Parameters of KINGSTON SVP200S37A256G with 505ABBF0 Firmware
| General information | |
|---|---|
| Trademark | Kingston |
| Model | KINGSTON SVP200S37A256G |
| Capacity | 238.4 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | 505ABBF0 |
| Firmware upgrade | supported |
| SSD controller | SandForce |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 6 |
| Times tested | 9 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 436 MB/s |
| Maximum read speed | 435 MB/s |
| Minimum average access time | 0.19 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| Acoustic Management (AAM) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 23 |
| SCT Transport | supported |
| Duration of full self test | 48 minutes |
| Critical maximum temperature | 234°C (197°F) |
| Recommended maximum temperature | 120°C (248°F) |
| Maximum temperature | 82°C (179°F) |
| Average maximum temperature | 79°C (174°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Complete destruction of information | 2 minutes |
| Instant information destruction | not supported |
| Hidden partition | supported |
| Partition access restriction | not supported |
| Trusted Computing | not supported |