Parameters of Kingston SHPM2280P2/240G with Firmware 0C4005T2
| General information | |
|---|---|
| Trademark | Kingston |
| Model | Kingston SHPM2280P2/240G |
| Capacity | 223.5 GB |
| Interface | SATA |
| Form-factor | M.2 |
| Firmware | 0C4005T2 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 142 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 1087 MB/s |
| Maximum read speed | 989 MB/s |
| Minimum average access time | 0.6 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 30 |
| SCT Transport | supported |
| Duration of full self test | 5 minutes |
| Maximum temperature | 87°C (188°F) |
| Average maximum temperature | 74°C (165°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 4 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted Computing | not supported |