Parameters of LITEON CV3-8D128 with Firmware T871202
| General information | |
|---|---|
| Trademark | Lite-On |
| Model | LITEON CV3-8D128 |
| Capacity | 128 GB (119.2 GiB) |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.1 |
| Controller | Silicon Motion |
| Firmware | T871202 |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 5 |
| Times tested | 17 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 445 MiB/s |
| Maximum read speed | 256 MiB/s |
| Minimum average access time | 0.8 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | not supported |
| Device sleep (DevSleep) | supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 20 |
| SMART command transport (SCT) | supported |
| Full self-test time | 11 minutes |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 85°C (185°F) |
| Average maximum temperature | 76°C (168°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 6 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |