Parameters of LITEON CV3-8D256 with Firmware T886201
| General information | |
|---|---|
| Trademark | Lite-On |
| Model | LITEON CV3-8D256 |
| Capacity | 238.4 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Firmware | T886201 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| SSD controller | Samsung |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 4 |
| Times tested | 8 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 464 MB/s |
| Maximum read speed | 377 MB/s |
| Minimum average access time | 0.6 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 18 |
| SCT Transport | supported |
| Duration of full self test | 22 minutes |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 85°C (185°F) |
| Average maximum temperature | 70°C (158°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted Computing | not supported |