Parameters of LITEON CV3-8D512-11 SATA 512GB with Firmware T89110D
| General information | |
|---|---|
| Trademark | Lite-On |
| Model | LITEON CV3-8D512-11 SATA 512GB |
| Capacity | 512.1 GB (476.9 GiB) |
| Form-factor | M.2 |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.1 |
| Controller | Silicon Motion |
| Firmware | T89110D |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 2 |
| Times tested | 13 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 430 MiB/s |
| Maximum read speed | 363 MiB/s |
| Minimum average access time | 0.11 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | not supported |
| Device sleep (DevSleep) | supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 18 |
| SMART command transport (SCT) | supported |
| Full self-test time | 44 minutes |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 85°C (185°F) |
| Average maximum temperature | 84°C (183°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 6 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |