Parameters of LITEON IT LCS-256L9S-HP with Firmware 9C08
General information | |
---|---|
Trademark | Lite-On |
Model | LITEON IT LCS-256L9S-HP |
Capacity | 238.4 GB |
Interface | SATA |
SATA version | 3.1 |
Form-factor | 2.5" |
Firmware | 9C08 |
Firmware upgrade | supported |
SSD controller | Samsung |
ATA version | ACS-3 |
Advanced Format | not supported |
Units tested | 1 |
Times tested | 1 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 393 MB/s |
Maximum read speed | 334 MB/s |
Minimum average access time | 0.11 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 20 |
SCT Transport | supported |
Duration of full self test | 8 minutes |
Maximum temperature | 50°C (122°F) |
Average maximum temperature | 50°C (122°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 6 minutes |
Instant data destruction | supported |
Host protected area (HPA) | not supported |
Trusted computing | not supported |