Parameters of M4-CT128M4SSD3 with Firmware 01MG
General information | |
---|---|
Trademark | Crucial |
Model | M4-CT128M4SSD3 |
Capacity | 119.2 GB |
Interface | SATA |
SATA version | 3.0 |
Form-factor | < 1.8" |
Firmware | 01MG |
Alternative firmwares | 1 |
Firmware upgrade | supported |
SSD controller | Micron |
ATA version | ACS-2 |
Advanced Format | not supported |
Units tested | 1 |
Times tested | 2 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum read speed | 216 MB/s |
Minimum average access time | 0.16 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | not supported |
TRIM | supported |
Reliability | |
Count of sensors | 23 |
SCT Transport | supported |
Duration of full self test | 9 minutes |
Critical maximum temperature | 75°C (167°F) |
Recommended maximum temperature | 70°C (158°F) |
Temperature sensor | not supported |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |