Parameters of Micron_5300_MTFDDAK960TDS with Firmware D3MU001

General information
TrademarkMicron
ModelMicron_5300_MTFDDAK960TDS
Capacity894.2 GB
InterfaceSATA
SATA version3.3
Form-factor2.5"
FirmwareD3MU001
Firmware upgradesupported
SSD controllerMarvell
ATA versionACS-4
Advanced Formatsupported
Units tested1
Times tested1
Performance
Maximum interface speed600 MB/s
Maximum buffered read speed394 MB/s
Maximum read speed330 MB/s
Minimum average access time0.6 msec
Volatile write cachesupported
Read look-aheadsupported
Command Queuing Optimization (NCQ)supported
Advanced Power Management (APM)supported
Device Sleep (DevSleep)not supported
TRIMsupported
Reliability
Count of sensors28
SCT Transportsupported
Duration of full self test8 minutes
Critical maximum temperature75°C (167°F)
Recommended maximum temperature70°C (158°F)
Maximum temperature42°C (107°F)
Average maximum temperature42°C (107°F)
Security
Drive access restrictionsupported
Enhanced security erasesupported
Data destruction time2 minutes
Instant data destructionsupported
Host protected area (HPA)not supported
Trusted computingnot supported