Parameters of SAMSUNG HD080HJ/P with Firmware ZH100-41
| General information | |
|---|---|
| Trademark | Samsung |
| Model | SAMSUNG HD080HJ/P |
| Capacity | 74.5 GB |
| Interface | SATA |
| Firmware | ZH100-41 |
| Alternative firmwares | 4 |
| Firmware upgrade | supported |
| ATA version | 7 |
| Advanced Format | not supported |
| Units tested | 8 |
| Times tested | 18 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 200 MB/s |
| Maximum read speed | 57 MB/s |
| Minimum average access time | 13.10 msec |
| Cache buffer | 8 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Acoustic Management (AAM) | supported |
| Reliability | |
| Count of sensors | 21 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 31 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 56°C (132°F) |
| Average maximum temperature | 48°C (118°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 44 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |