Parameters of SAMSUNG HD153WI with Firmware 1AN10003
| General information | |
|---|---|
| Trademark | Samsung |
| Model | SAMSUNG HD153WI |
| Capacity | 1.3 TB |
| Interface | SATA |
| SATA version | 2.6 |
| Form-factor | 3.5" |
| Firmware | 1AN10003 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 17 |
| Times tested | 60 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 231 MB/s |
| Maximum read speed | 122 MB/s |
| Minimum average access time | 12.70 msec |
| Cache buffer | 31.9 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 22 |
| Free-fall Control | not supported |
| SCT Transport | supported |
| Duration of full self test | > 255 minutes |
| Critical maximum temperature | 85°C (185°F) |
| Recommended maximum temperature | 80°C (176°F) |
| Maximum temperature | 51°C (123°F) |
| Average maximum temperature | 36°C (96°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 314 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted Computing | not supported |