Parameters of SAMSUNG HD400LD with WQ100-15 Firmware
General information | |
---|---|
Trademark | Samsung |
Model | SAMSUNG HD400LD |
Capacity | 372.6 GB |
Interface | PATA |
Maximum Ultra DMA mode | 5 |
Firmware | WQ100-15 |
Alternative firmwares | 1 |
Firmware upgrade | supported |
ATA version | 7 |
Advanced Format | not supported |
Units tested | 22 |
Times tested | 75 |
Performance | |
Maximum interface speed | 100 MB/s |
Maximum buffered read speed | 90 MB/s |
Maximum read speed | 81 MB/s |
Minimum average access time | 4.90 msec |
Cache buffer | 8 MB |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (TCQ) | not supported |
Advanced Power Management (APM) | not supported |
Acoustic Management (AAM) | supported |
Reliability | |
Count of sensors | 19 |
Free-fall Control | not supported |
SCT Transport | supported |
Duration of full self test | 133 minutes |
Critical maximum temperature | 60°C (140°F) |
Recommended maximum temperature | 55°C (131°F) |
Maximum temperature | 68°C (154°F) |
Average maximum temperature | 39°C (102°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Complete destruction of information | 228 minutes |
Instant information destruction | not supported |
Hidden partition | supported |
Partition access restriction | supported |
Trusted Computing | not supported |