Parameters of SAMSUNG SP1253N with Firmware BU100-37
General information | |
---|---|
Trademark | Samsung |
Model | SAMSUNG SP1253N |
Capacity | 111.7 GB |
Interface | PATA |
Maximum Ultra DMA mode | 5 |
Firmware | BU100-37 |
Alternative firmwares | 1 |
Firmware upgrade | supported |
ATA version | 7 |
Advanced Format | not supported |
Units tested | 5 |
Times tested | 18 |
Performance | |
Maximum interface speed | 100 MB/s |
Maximum buffered read speed | 87 MB/s |
Maximum read speed | 63 MB/s |
Minimum average access time | 10.0 msec |
Cache buffer | 8 MB |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (TCQ) | not supported |
Advanced Power Management (APM) | not supported |
Acoustic Management (AAM) | supported |
Reliability | |
Count of sensors | 20 |
Free-fall Control | not supported |
SCT Transport | supported |
Duration of full self test | 46 minutes |
Critical maximum temperature | 60°C (140°F) |
Recommended maximum temperature | 55°C (131°F) |
Maximum temperature | 57°C (134°F) |
Average maximum temperature | 54°C (129°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 66 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |