Parameters of SDLF1CRM-016T-1HA1 with Firmware ZR11REA1
| General information | |
|---|---|
| Trademark | SanDisk |
| Model | SDLF1CRM-016T-1HA1 |
| Capacity | 1.4 TB |
| Interface | SATA |
| SATA version | 3.1 |
| Firmware | ZR11REA1 |
| Firmware upgrade | supported |
| SSD controller | Unknown |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 188 MB/s |
| Maximum read speed | 146 MB/s |
| Minimum average access time | 0.23 msec |
| Cache buffer | 8 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | not supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 24 |
| SCT Transport | supported |
| Duration of full self test | 1 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 65°C (149°F) |
| Maximum temperature | 76°C (168°F) |
| Average maximum temperature | 76°C (168°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 6 minutes |
| Instant data destruction | supported |
| Host protected area (HPA) | supported |
| Host protected area password | not supported |
| Trusted computing | not supported |