Parameters of SDLF1CRR-019T-1HAP with Firmware ZR11RPA1
| General information | |
|---|---|
| Trademark | SanDisk |
| Model | SDLF1CRR-019T-1HAP |
| Capacity | 1.9 TB (1.7 TiB) |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.1 |
| Controller | unknown |
| Firmware | ZR11RPA1 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 1 |
| Times tested | 2 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 65 MiB/s |
| Maximum read speed | 61 MiB/s |
| Minimum average access time | 0.13 msec |
| Cache buffer | 8 MiB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | not supported |
| Device sleep (DevSleep) | not supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 24 |
| SMART command transport (SCT) | supported |
| Full self-test time | 1 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 65°C (149°F) |
| Maximum temperature | 42°C (107°F) |
| Average maximum temperature | 42°C (107°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 8 minutes |
| Instant data destruction | supported |
| Host protected area (HPA) | supported |
| Host protected area password | not supported |
| Trusted computing | not supported |