Parameters of SPK-SF12-M60 with Firmware 363A13F0
| General information | |
|---|---|
| Trademark | KingSpec |
| Model | SPK-SF12-M60 |
| Capacity | 60 GB (55.8 GiB) |
| Type | SSD |
| Interface | SATA |
| SATA version | 2.6 |
| Controller | SandForce |
| Firmware | 363A13F0 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 165 MiB/s |
| Maximum read speed | 149 MiB/s |
| Minimum average access time | 0.20 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | not supported |
| Device sleep (DevSleep) | not supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 19 |
| SMART command transport (SCT) | supported |
| Full self-test time | 5 minutes |
| Maximum temperature | 30°C (86°F) |
| Average maximum temperature | 30°C (86°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 400 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |