| General information |
|---|
| Trademark | GoodRAM |
| Model | SSDPR-CL100-120-G2 |
| Capacity | 111.7 GB |
| Interface | SATA |
| SATA version | 3.2 |
| Firmware | N1209B |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-3 |
| Advanced Format | not supported |
| Units tested | 1 |
| Times tested | 1 |
| Performance |
|---|
| Maximum interface speed | 600 MB/s |
| Maximum read speed | 212 MB/s |
| Minimum average access time | 0.13 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Device sleep (DevSleep) | not supported |
| Clearing unused data (TRIM) | supported |
| Reliability |
|---|
| Count of sensors | 27 |
| SMART command transport (SCT) | not supported |
| Full self-test time | 1 minutes |
| Maximum temperature | 41°C (105°F) |
| Average maximum temperature | 41°C (105°F) |
| Security |
|---|
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |