Parameters of ST1000DL002-9TT153 with Firmware CC3C
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST1000DL002-9TT153 |
| Capacity | 1 TB (931.5 GiB) |
| Type | HDD |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | CC3C |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 40 |
| Times tested | 85 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 474 MiB/s |
| Maximum read speed | 140 MiB/s |
| Minimum average access time | 16.90 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | not supported |
| Acoustic management (AAM) | supported |
| Clearing unused data (TRIM) | not supported |
| Rotation rate | 5900 rpm |
| Reliability | |
| Count of sensors | 25 |
| Free-fall control | not supported |
| SMART command transport (SCT) | supported |
| Full self-test time | 176 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 57°C (134°F) |
| Average maximum temperature | 45°C (113°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 168 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |