Parameters of ST1000LM035-1RK172 with Firmware ACM1
General information | |
---|---|
Trademark | Seagate |
Model | ST1000LM035-1RK172 |
Capacity | 931.5 GB |
Interface | SATA |
SATA version | 3.1 |
Form-factor | 2.5" |
Firmware | ACM1 |
Alternative firmwares | 24 |
Firmware upgrade | supported |
ATA version | ACS-3 |
Advanced Format | supported |
Units tested | 19 |
Times tested | 35 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 375 MB/s |
Maximum read speed | 158 MB/s |
Minimum average access time | 19.8 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Acoustic Management (AAM) | not supported |
Rotation rate | 5400 rpm |
Reliability | |
Count of sensors | 24 |
Free-fall Control | not supported |
SMART Command Transport (SCT) | supported |
Duration of full self test | 171 minutes |
Critical maximum temperature | 60°C (140°F) |
Recommended maximum temperature | 55°C (131°F) |
Maximum temperature | 55°C (131°F) |
Average maximum temperature | 50°C (122°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 172 minutes |
Instant data destruction | not supported |
Host protected area (HPA) | supported |
Host protected area password | supported |
Trusted computing | not supported |