| General information |
|---|
| Trademark | Seagate |
| Model | ST1000LM035-1RK172 |
| Capacity | 931.5 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Form-factor | 2.5" |
| Firmware | MCC3 |
| Alternative firmwares | 26 |
| Firmware upgrade | supported |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 11 |
| Times tested | 17 |
| Performance |
|---|
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 453 MB/s |
| Maximum read speed | 145 MB/s |
| Minimum average access time | 6.11 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Acoustic management (AAM) | not supported |
| Clearing unused data (TRIM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability |
|---|
| Count of sensors | 24 |
| Free-fall control | not supported |
| SMART command transport (SCT) | supported |
| Full self-test time | 169 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 69°C (156°F) |
| Average maximum temperature | 57°C (134°F) |
| Security |
|---|
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 170 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |