Parameters of ST1000LM049-2GH172 with Firmware SDM2
General information | |
---|---|
Trademark | Seagate |
Model | ST1000LM049-2GH172 |
Capacity | 931.5 GB |
Interface | SATA |
SATA version | 3.1 |
Form-factor | 2.5" |
Firmware | SDM2 |
Alternative firmwares | 6 |
Firmware upgrade | supported |
ATA version | ACS-3 |
Advanced Format | supported |
Units tested | 3 |
Times tested | 3 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 328 MB/s |
Maximum read speed | 228 MB/s |
Minimum average access time | 1.3 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Acoustic Management (AAM) | not supported |
Rotation rate | 7200 rpm |
Reliability | |
Count of sensors | 23 |
Free-fall Control | not supported |
SCT Transport | supported |
Duration of full self test | 122 minutes |
Critical maximum temperature | 60°C (140°F) |
Recommended maximum temperature | 55°C (131°F) |
Maximum temperature | 64°C (147°F) |
Average maximum temperature | 58°C (136°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Complete destruction of information | 124 minutes |
Instant information destruction | not supported |
Hidden partition | supported |
Partition access restriction | supported |
Trusted Computing | not supported |