Parameters of ST1000LX015-1U7172 with Firmware SDM3
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST1000LX015-1U7172 |
| Capacity | 931.5 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Form-factor | 2.5" |
| Firmware | SDM3 |
| Alternative firmwares | 2 |
| Firmware upgrade | supported |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 3 |
| Times tested | 17 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 366 MB/s |
| Maximum read speed | 154 MB/s |
| Minimum average access time | 0.19 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 24 |
| Free-fall Control | not supported |
| SCT Transport | supported |
| Duration of full self test | 171 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 51°C (123°F) |
| Average maximum temperature | 50°C (122°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 172 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted Computing | not supported |