Parameters of ST2000LM007-1R8174 with Firmware SDM2
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST2000LM007-1R8174 |
| Capacity | 1.8 TB |
| Interface | SATA |
| SATA version | 3.1 |
| Form-factor | 2.5" |
| Firmware | SDM2 |
| Alternative firmwares | 11 |
| Firmware upgrade | supported |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 15 |
| Times tested | 68 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 375 MB/s |
| Maximum read speed | 180 MB/s |
| Minimum average access time | 17.83 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 24 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | > 255 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 55°C (131°F) |
| Average maximum temperature | 54°C (129°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 344 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |