Parameters of ST320LT020-9YG142 with Firmware 0003DEM1
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST320LT020-9YG142 |
| Capacity | 298 GB |
| Interface | SATA |
| SATA version | 2.6 |
| Firmware | 0003DEM1 |
| Alternative firmwares | 7 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 9 |
| Times tested | 12 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 228 MB/s |
| Maximum read speed | 92 MB/s |
| Minimum average access time | 21.3 msec |
| Cache buffer | 16 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 28 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 90 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 60°C (140°F) |
| Average maximum temperature | 51°C (123°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 84 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |