Parameters of ST320LT020-9YG142 with Firmware 0010SDM1
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST320LT020-9YG142 |
| Capacity | 320 GB (298 GiB) |
| Type | HDD |
| Interface | SATA |
| SATA version | 2.6 |
| Firmware | 0010SDM1 |
| Alternative firmwares | 7 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 16 |
| Times tested | 24 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 237 MiB/s |
| Maximum read speed | 92 MiB/s |
| Minimum average access time | 20.84 msec |
| Cache buffer | 16 MiB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Acoustic management (AAM) | not supported |
| Clearing unused data (TRIM) | not supported |
| Rotation rate | 5400 rpm |
| Reliability | |
| Count of sensors | 28 |
| Free-fall control | not supported |
| SMART command transport (SCT) | supported |
| Full self-test time | 91 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 59°C (138°F) |
| Average maximum temperature | 49°C (120°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 84 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |