Parameters of ST4000LM024-2AN17V with Firmware 0001
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST4000LM024-2AN17V |
| Capacity | 4 TB (3.6 TiB) |
| Form-factor | 2.5" |
| Type | HDD |
| Interface | SATA |
| SATA version | 3.1 |
| Firmware | 0001 |
| Firmware upgrade | supported |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 173 |
| Times tested | 374 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 477 MiB/s |
| Maximum read speed | 168 MiB/s |
| Minimum average access time | 7.15 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Acoustic management (AAM) | not supported |
| Clearing unused data (TRIM) | not supported |
| Rotation rate | 5526 rpm |
| Reliability | |
| Count of sensors | 26 |
| Free-fall control | not supported |
| SMART command transport (SCT) | supported |
| Full self-test time | > 255 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 74°C (165°F) |
| Average maximum temperature | 53°C (127°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 720 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | supported |