Parameters of ST500DM002-1SB10A with Firmware HPH4
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST500DM002-1SB10A |
| Capacity | 500.1 GB (465.7 GiB) |
| Form-factor | 3.5" |
| Type | HDD |
| Interface | SATA |
| SATA version | 3.1 |
| Firmware | HPH4 |
| Alternative firmwares | 6 |
| Firmware upgrade | supported |
| ATA version | ACS-3 |
| Advanced Format | supported |
| Units tested | 12 |
| Times tested | 18 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 449 MiB/s |
| Maximum read speed | 217 MiB/s |
| Minimum average access time | 14.38 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Acoustic management (AAM) | not supported |
| Clearing unused data (TRIM) | not supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 22 |
| Free-fall control | not supported |
| SMART command transport (SCT) | supported |
| Full self-test time | 55 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 57°C (134°F) |
| Average maximum temperature | 46°C (114°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 56 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |