Parameters of ST750LX003-1AC154 with Firmware SM12
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST750LX003-1AC154 |
| Capacity | 750.1 GB (698.6 GiB) |
| Form-factor | 2.5" |
| Type | HDD |
| Interface | SATA |
| SATA version | 3.0 |
| Firmware | SM12 |
| Alternative firmwares | 1 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 58 |
| Times tested | 125 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 416 MiB/s |
| Maximum read speed | 126 MiB/s |
| Minimum average access time | 0.18 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Acoustic management (AAM) | not supported |
| Clearing unused data (TRIM) | not supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 22 |
| Free-fall control | not supported |
| SMART command transport (SCT) | supported |
| Full self-test time | 153 minutes |
| Maximum temperature | 72°C (161°F) |
| Average maximum temperature | 53°C (127°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 150 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |