Parameters of ST9750420AS with Firmware 0005DEM1
| General information | |
|---|---|
| Trademark | Seagate |
| Model | ST9750420AS |
| Capacity | 750.1 GB (698.6 GiB) |
| Type | HDD |
| Interface | SATA |
| SATA version | 2.6 |
| Firmware | 0005DEM1 |
| Alternative firmwares | 9 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 8 |
| Times tested | 9 |
| Performance | |
| Maximum interface speed | 300 MB/s |
| Maximum buffered read speed | 207 MiB/s |
| Maximum read speed | 120 MiB/s |
| Minimum average access time | 15.52 msec |
| Cache buffer | 16 MiB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | supported |
| Acoustic management (AAM) | not supported |
| Clearing unused data (TRIM) | not supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 25 |
| Free-fall control | not supported |
| SMART command transport (SCT) | supported |
| Full self-test time | 151 minutes |
| Critical maximum temperature | 60°C (140°F) |
| Recommended maximum temperature | 55°C (131°F) |
| Maximum temperature | 84°C (183°F) |
| Average maximum temperature | 60°C (140°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 140 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |