Parameters of Samsung SSD 850 EVO M.2 250GB with Firmware EMT21B6Q
| General information | |
|---|---|
| Trademark | Samsung |
| Model | Samsung SSD 850 EVO M.2 250GB |
| Capacity | 250 GB (232.8 GiB) |
| Form-factor | M.2 |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.1 |
| Controller | Samsung |
| Firmware | EMT21B6Q |
| Firmware upgrade | supported |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 12 |
| Times tested | 41 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 480 MiB/s |
| Maximum read speed | 478 MiB/s |
| Minimum average access time | 0.5 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | not supported |
| Device sleep (DevSleep) | supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 14 |
| SMART command transport (SCT) | supported |
| Full self-test time | 133 minutes |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 76°C (168°F) |
| Average maximum temperature | 65°C (149°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | supported |