Parameters of Samsung SSD 860 EVO M.2 500GB with Firmware RVT23B6Q
| General information | |
|---|---|
| Trademark | Samsung |
| Model | Samsung SSD 860 EVO M.2 500GB |
| Capacity | 500.1 GB (465.7 GiB) |
| Form-factor | M.2 |
| Type | SSD |
| Interface | SATA |
| SATA version | 3.2 |
| Controller | Samsung |
| Firmware | RVT23B6Q |
| Alternative firmwares | 3 |
| Firmware upgrade | supported |
| ATA version | ACS-4 |
| Advanced Format | not supported |
| Units tested | 2 |
| Times tested | 23 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum read speed | 409 MiB/s |
| Minimum average access time | 0.12 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Native command queuing (NCQ) | supported |
| Advanced power management (APM) | not supported |
| Device sleep (DevSleep) | supported |
| Clearing unused data (TRIM) | supported |
| Reliability | |
| Count of sensors | 14 |
| SMART command transport (SCT) | supported |
| Full self-test time | 85 minutes |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 58°C (136°F) |
| Average maximum temperature | 46°C (114°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 4 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | supported |