Parameters of SanDisk SD5SB2-128G-1006E with Firmware 10.06.06
| General information | |
|---|---|
| Trademark | SanDisk |
| Model | SanDisk SD5SB2-128G-1006E |
| Capacity | 119.2 GB |
| Interface | SATA |
| SATA version | 3.1 |
| Form-factor | 2.5" |
| Firmware | 10.06.06 |
| Firmware upgrade | supported |
| SSD controller | Marvell |
| ATA version | ACS-2 |
| Advanced Format | not supported |
| Units tested | 12 |
| Times tested | 49 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum read speed | 440 MB/s |
| Minimum average access time | 0.19 msec |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Device Sleep (DevSleep) | not supported |
| TRIM | supported |
| Reliability | |
| Count of sensors | 16 |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 10 minutes |
| Critical maximum temperature | 90°C (194°F) |
| Recommended maximum temperature | 70°C (158°F) |
| Maximum temperature | 52°C (125°F) |
| Average maximum temperature | 37°C (98°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | supported |
| Data destruction time | 2 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | not supported |
| Trusted computing | not supported |