Parameters of SanDisk SD6SB1M-128G-1006 with X231706 Firmware
General information | |
---|---|
Trademark | SanDisk |
Model | SanDisk SD6SB1M-128G-1006 |
Capacity | 119.2 GB |
Interface | SATA |
SATA version | 3.1 |
Firmware | X231706 |
Firmware upgrade | supported |
SSD controller | Marvell |
ATA version | ACS-2 |
Advanced Format | not supported |
Units tested | 4 |
Times tested | 19 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum buffered read speed | 421 MB/s |
Maximum read speed | 412 MB/s |
Minimum average access time | 0.11 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | not supported |
Acoustic Management (AAM) | not supported |
TRIM | supported |
Reliability | |
Count of sensors | 17 |
SCT Transport | supported |
Duration of full self test | 10 minutes |
Critical maximum temperature | 90°C (194°F) |
Recommended maximum temperature | 70°C (158°F) |
Maximum temperature | 46°C (114°F) |
Average maximum temperature | 43°C (109°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Complete destruction of information | 2 minutes |
Instant information destruction | supported |
Hidden partition | not supported |
Partition access restriction | not supported |
Trusted Computing | not supported |