Parameters of SanDisk SD9SN8W-256G-1006 with Firmware X6103006
General information | |
---|---|
Trademark | SanDisk |
Model | SanDisk SD9SN8W-256G-1006 |
Capacity | 238.4 GB |
Interface | SATA |
SATA version | 3.3 |
Form-factor | M.2 |
Firmware | X6103006 |
Alternative firmwares | 1 |
Firmware upgrade | supported |
SSD controller | Marvell |
ATA version | ACS-4 |
Advanced Format | supported |
Units tested | 4 |
Times tested | 6 |
Performance | |
Maximum interface speed | 600 MB/s |
Maximum read speed | 440 MB/s |
Minimum average access time | 0.7 msec |
Volatile write cache | supported |
Read look-ahead | supported |
Command Queuing Optimization (NCQ) | supported |
Advanced Power Management (APM) | supported |
Device Sleep (DevSleep) | supported |
TRIM | supported |
Reliability | |
Count of sensors | 24 |
SMART Command Transport (SCT) | supported |
Duration of full self test | 21 minutes |
Critical maximum temperature | 90°C (194°F) |
Recommended maximum temperature | 85°C (185°F) |
Maximum temperature | 73°C (163°F) |
Average maximum temperature | 65°C (149°F) |
Security | |
Drive access restriction | supported |
Enhanced security erase | supported |
Data destruction time | 2 minutes |
Instant data destruction | supported |
Host protected area (HPA) | not supported |
Trusted computing | not supported |