Parameters of TOSHIBA DT01ACA100 with Firmware MS2OA750
| General information | |
|---|---|
| Trademark | Toshiba |
| Model | TOSHIBA DT01ACA100 |
| Capacity | 931.5 GB |
| Interface | SATA |
| SATA version | 3.0 |
| Form-factor | 3.5" |
| Firmware | MS2OA750 |
| Alternative firmwares | 11 |
| Firmware upgrade | supported |
| ATA version | 8 (ACS) |
| Advanced Format | supported |
| Units tested | 463 |
| Times tested | 863 |
| Performance | |
| Maximum interface speed | 600 MB/s |
| Maximum buffered read speed | 8741 MB/s |
| Maximum read speed | 246 MB/s |
| Minimum average access time | 4.59 msec |
| Cache buffer | 23 MB |
| Volatile write cache | supported |
| Read look-ahead | supported |
| Command Queuing Optimization (NCQ) | supported |
| Advanced Power Management (APM) | supported |
| Acoustic Management (AAM) | not supported |
| Rotation rate | 7200 rpm |
| Reliability | |
| Count of sensors | 17 |
| Free-fall Control | not supported |
| SMART Command Transport (SCT) | supported |
| Duration of full self test | 137 minutes |
| Critical maximum temperature | 70°C (158°F) |
| Recommended maximum temperature | 60°C (140°F) |
| Maximum temperature | 64°C (147°F) |
| Average maximum temperature | 46°C (114°F) |
| Security | |
| Drive access restriction | supported |
| Enhanced security erase | not supported |
| Data destruction time | 180 minutes |
| Instant data destruction | not supported |
| Host protected area (HPA) | supported |
| Host protected area password | supported |
| Trusted computing | not supported |